Products and Finishes:

Sibelius SG

 

The Sibelius SG is a single drive unit, floor standing loudspeaker utilizing an internal front loaded, quarter wave ‘V’ horn.  It has a shallow, all alloy drive cone which is mounted into a solid oak cabinet.  Apart from the internal connecting leads, terminal posts and internal dampening materials, The Sibelius SG has no other components.

 

The Sibelius SG is comfortable covering most genres of music but especially acoustic instruments either in classical, jazz, folk, blues and light rock. From solo voice to small ensembles, chamber and symphonic orchestras the Sibelius SG faithfully reproduces the full dynamics required by each type.

 

Pairing: Because The Sibelius SG delivers so much detail (nothing is lost) it is best paired with very high quality amplifiers. Our preference is (as long as space and budgets allow) for single ended ‘Class A’ triode vacuum tube amplifiers.  However, high quality solid state amplifiers with low distortion characteristics are also fine.  The Sibelius is particularly well matched with ‘Class A’ type current dumping amplifiers, which can handle massive transients without the distortion sometimes found in lower quality AB (push-pull) amplifiers. 

 

Specifications:


Impedance: 7.5 Ohm
Power handling: 35 Watts RMS – 70 Watts peak
Efficiency: 87.5db @ 1W @ 1 meter
Maximum output : 105db @ 1 Meter
Frequency range: 28Hz-30Khz (ten octaves)*
Dimensions: 1093mm (H) 225mm (W) 295mm (D)
Weight: 29kg each


Sibelius ‘P’

 

For absolute connoisseurs only, the Sibelius ‘P’ has the same characteristics of the SG except that it is driven by a paper cone. Vintage lovers who appreciate the sound of paper cones will appreciate the Sibelius ‘P’. Whereas the Sibelius SG is suited for most genres, the ‘P’ is mostly comfortable as far away as possible from heavy rock and electronically synthesized music.  The Sibelius ‘P’ demands to be part of only the very highest quality of Hi-Fi installation systems. Because of its very shallow profile drive cone it needs to be placed in rooms that have been acoustically optimized for realistic and comfortable listening.

 

Pairing: Only the very best, high quality amplifiers: Single ended ‘Class A’ triode vacuum tube amplifiers or extremely high quality solid state amplifiers with very low distortion specifications. 

 

Specifications:


Impedance: 6.2 Ohm
Power handling: 30 Watts RMS – 65 Watts peak
Efficiency: 89.6db @ 1W @ 1 meter
Maximum output : 104db @ 1 Meter
Frequency range: 28Hz-30Khz (ten octaves)*
Dimensions: 1093mm (H) 225mm (W) 295mm (D)
Weight: 29kg each


Sibelius CG

 

The Sibelius CG is identical to the SG in every aspect, apart from the fact that its cone has a deep copper colour which some people prefer. The ‘CG’ is a limited edition of only 48 pairs. Please check for availability.

 

The Sibelius CG is comfortable covering most genres of music but especially acoustic instruments either in classical, jazz, folk, blues and light rock. From solo voice to small ensembles, chamber and symphonic orchestras the Sibelius CG faithfully reproduces the full dynamics required by each type.

 

Pairing: Because The Sibelius SG delivers so much detail (nothing is lost) it is best paired with very high quality amplifiers. Our preference is (as long as space and budgets allow) for single ended ‘Class A’ triode vacuum tube amplifiers.  However, high quality solid state amplifiers with low distortion characteristics are also fine.  The Sibelius is particularly well matched with ‘Class A’ type current dumping amplifiers, which can handle massive transients without the distortion sometimes found in lower quality AB (push-pull) amplifiers. 

 

Specifications:


Impedance: 7.5 Ohm
Power handling: 35 Watts RMS – 70 Watts peak
Efficiency: 87.5db @ 1W @ 1 meter
Maximum output : 105db @ 1 Meter
Frequency range: 28Hz-30Khz (ten octaves)*
Dimensions: 1093mm (H) 225mm (W) 295mm (D)
Weight: 29kg each

 

Speaker Covers

These smart looking, padded covers push over the top of your Sibelius drivers to protect them from prying fingers, pets and accidental damage.
Simply pull off to reveal the driver, ready for use. Sold in pairs, only in black.

Finishes and colours

 

Varnish / Stain Finish:  A natural stain with a high quality matt varnish coating - (gloss is available upon special request)

  • Natural
  • Light Oak
  • Medium Oak
  • Wenge (Dark Oak)
  • Weathered
  • Cherry

The casings of all Pearl Acoustics enclosures are constructed from solid French Oak. We believe that there is no better wood for making high quality loudspeakers. Since the 17th. Century the world’s finest organ builders have used slow grown, European oak for its neutral sound imaging and long-term structural stability.

All the oak we select for our cabinets comes from sustainable forests. Because our enclosure casings are made with a minimum thickness of 30mm for The Sibelius without any kind of veneer, there is absolutely no reason why the natural finished cabinets will not remain in perfect condition forever, as long as they are looked after properly and kept in the right conditions.

Note: Naturally finished Pearl Acoustics cabinets, like musical instruments, should be kept in rooms with moderate temperature and humidity variations. If you have any concerns at all, please contact our technical department: Techinfo@pearlacoustics.com

Sibelius CG:


Sibelius SG: